Home >> Finishings Korda's

Finishings Korda's

 

 

SHRINKLESS

The rope is pre-shrunk and treated with additives during manufacture to obtain a better Feel-Abrasion relationship by means of a thermo-chemical process. This finishing makes it unnecessary to soak the rope prior to use and minimizes the shrinkage during the usage of the rope.

Durability

shrinklesss.png

 
 
 

TOTAL DRY

Impermeable, absorbs less water, lasts longer and delays the freezing.

Durability

total_dry.png

 
 
 

 

durability.png

 

DURABILITY

High resistance to abrasion and more pleasant to the touch.                                                                      

   

 

 

 
 

CENTRAL/END MARK

A series of marks are made on the rope with a special ink that does not affect the rope’s resistance. Clear indications of the rope’s centre-point.

Durability

central_mark.png

 
   
     

estability_groc-01.png

 

ESTABILITY

Complete bonding of the sheath and core.

Every part of the rope works at the same time. elimination of the unpleasent “sock effect” , i.e. slippage of the rope sheath. Gives the rope greater dimensional stability throghout its useful life and considerably reduce gradual rope shrinkage over time.

Durability

 
 
 
 

 

TITAN SYSTEM

The Titan System is far more than a finishing, is a patented rope manufacturing system which provides significant improvements on the rope.

Until now, ropes used in the field of climbing and safety have been constructed made up basically of 2 structures, the core and the sheath.

The Titan system incorporates a third structure constitued by a series of filaments running parallel to the rope axis inside the sheath structure, thus transforming it into an element of “armour plating”. In a conventional rope the sheath filaments follow a helicoidal pattern and all pass through the same laterial section of the rope in spirals a few centimetres apart. consequently, if the rope suffers damage on one side, serious abrasion of som 5 or 10 cm in lenght  for example, all of the sheath's filaments will be affected and it runs therisk of tearing.

One of the advantatges inherent in the ropes manufatured using the TITAN System is that even if the sheath undergoes longitudinal damage it does not tear.

patented_0.png

titan_blau-01.png

 
summum_system_vermell-01.png

SUMMUM SYSTEM

Summum is the constructive System of the KORDA’S third generation. This join the already known Estability and Titan System, achieving with this a maximum union between core and sheat and an even higher safety, thanks to the addition of the advantages of the two different systems with proved experience.

This is the maximum safety that, until now, can be offered to the rope users.

 

 

Iconos características Korda´s

 

kordas_iconos.jpg

 

 

¡Share with your friends!